5. Click WIZARD SETUP in the main menu to display the first wizard screen shown next.
6. Use the second wizard screen to set up the wireless LAN.
WEP (Wired Equivalent Privacy) encrypts data frames before transmitting them over the wireless network. Select either
64-bit or 128-bit from the WEP Encryption drop-down list box to activate WEP encryption. Select Disable to turn off
WEP data encryption.
Select ASCII or HEX WEP key input method and then follow the on-screen instructions to set up the WEP keys.
Click Next to continue.
The wireless stations and ZyAIR must use the same ESSID, channel ID and WEP
encryption key (if WEP is enabled) for wireless communication.
ZyAIR G-1000 Access Point
10
System Name is a unique name
to identify the ZyAIR in the
Ethernet network. Enter a
descriptive name.
Leave the Domain Name entry
blank and click Next to continue.
ESSID is a unique name to identify
the ZyAIR in the wireless LAN.
Enter a descriptive name.
A channel is the range of radio
frequencies used by IEEE 802.11g
wireless devices.
Choose a radio channel to use in
the Choose Channel ID field.