Before First Use - ALASKA JE1800 Instruction Manual

BEFORE FIRST USE

• Remove all protective packaging and wrapping. Make sure no packaging debris remain inside the appliance.
• Check for completeness and transport damage. In case of damages or incomplete delivery, please contact
your dealer ( Guarantee).
• Keep the packaging for storing your appliance when not in use for an extended period of time.
• Clean the appliance thoroughly ( Cleaning and care).
Warning!
• Unplug the appliance from power supply before cleaning.
• Danger of electric shock! Do not immerse the power cord with plug (8) or the base (7) in
water or other liquids.
• Danger of hand injury! Handle the blade (3) with care!
• Extend the power cord (8).
• Place the base (7) on a dry, flat, and steady surface. Press the base (7) firmly on the surface so that the
suction feet (9) get a good grip.
ASSEMBLY
Warning!
• Never connect the power plug (8) into an electrical outlet before the appliance is fully
assembled.
• Place the receptacle (4) on the base (7) (fig. 1). Make sure the spout (5) and lip (4) rest in place.
• Insert the stainless steel filter (3) inside the receptacle (4), matching its bottom with the base shaft. Press
the filter (3) downward until a click is heard (fig. 2).
• Attach the pulp collector (12) to the base (7), and insert its upper part under the receptacle lip (4). Push the
pulp collector's lower part firmly in place, and make sure the lower part fits properly onto the pulp collector
holder (11).
1
For_Real-JE1800-Ala-DE+GB-04c-HighRes.indb 5
2
5
3
6/12/12 5:44 PM