Technical Characteristics; Regulations; Installation - Bosch GWH 10-2 G Series Installation Manual And Operating Instructions

2.9

Technical characteristics

Technical characteristics
Gas Consumption
Nominal Gas Consumption
Supply pressure
Natural gas H
LP gas
Number of injectors
Water data
Maximum permissible pressure
Temperature selector in fully clockwise position
Temperature rise
Flow range
Minimum operating pressure
Minimum pressure for maximum flow
Temperature selector in fully anti-clockwise position
Temperature rise
Flow range
Minimum operating pressure
Minimum pressure for maximum flow
Table 5
3

Regulations

Any local by-laws and regulations pertaining to installation and
use of gas-heated appliances must be observed.
This appliance must be installed in accordance with the
manufacturers installation instructions, AS5601, NZ5261 and
all Local Building & Gas fitting regulations
It is recommended that for sanitary fixtures used for the
purpose of personal hygiene, that a temperature limitingl
device be fitted (such as a tempering valve) as per AS3498.
This appliance must not be installed in a bedroom, bathroom,
toilet, or combined living/sleeping room as per AS5601
5.12.5.2.
Failure to install this appliance in accordance with these
installation instructions will void the warranty.
6 720 608 992 (2018/01)
Units GWH10
MJ 79
kPa 1.13
kPa 2.75
12
kPa 1000
°C 50
l/min 2.2 - 4.6
kPa 35
kPa 50
°C 25
l/min 4 - 10
kPa 45
kPa 100
4

Installation

GWH13
100 (NG)
97 (LP gas)
1.13
2.75
14
1000
50
2.2 - 6.2
35
60
25
4 - 13
45
140
DANGER:
This appliance must not be installed in a
bedroom, bathroom, toilet or combined living/
sleeping room in accordance with AS5601.
DANGER: Explosion Risk
▶ Always turn off the gas cock before carrying
out any work on components which carry
gas.
The gas installation, connection of the flue and
supply pipes, as well as the initial startup are to
be performed exclusively by an authorised
person.
Regulations
GWH16
127
1.13
2.75
18
1000
50
2.2 - 8.6
50
80
25
4 - 15
50
170
9