During Use - Hyundai HYCH2800ES Instruction Manual

Safety Information

During Use

!
• Do not operate the machine in confined areas where there may be a risk of crushing the
operator between the machine and another object.
• Walk, never run with the machine. Be very careful when pulling the machine toward you. You
must look behind you to make sure there are no obstacles before and during operations.
• WARNING! If something breaks or an accident happens whilst working, you must turn off the
machine immediately and move the machine away to prevent further damage. If an accident
happens with injuries or third parties are injured, carry out the first aid measures most suitable
for the situation immediately and contact the medical authorities for any necessary health care.
Carefully remove any debris that might cause damage or harm persons or animals should it not
be seen.
• Do not carry passengers.
• The excessive speed of movement or the absence of maintenance have a significant influence
on noise emissions and vibrations. It is necessary to take preventive steps to eliminate possible
damage due to high levels of noise and stress from vibration. You must maintain the machine
well, wear ear protection and take breaks from working.
• Always turn off the machine and ensure that all moving parts have come to a complete stop
before making any repairs, adjustments, or inspections.
• You must switch off the machine and disconnect from the power source (making sure that all
moving parts are stationary):
- Before checking or working on the machine.
- Before clearing blockages.
- When transporting the machine.
- Whenever you leave the machine unattended.
• Keep your face and body away from the feeding chute.
• Hands, other parts of the body or clothing must not be placed in the feeder, in the ejection
channel or near moving parts.
• When feeding material, never stand on a level higher than the level of the base of the device.
• Keep a distance from the ejection opening at all times. When feeding material into the device,
be extremely careful not to insert metal pieces, stones, bottles, cans, or other foreign objects.
• Do not allow processed material to accumulate in the ejection area as this may prevent proper
ejection and cause the material to bounce back through the feed opening.
• Never remove the collection bag when the machine is being operated.
• Never touch under the housing body when the machine is running.
8
www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk