Assembly
Step 1 : Wheel Assembly
1
Turn the shredder upside down and pivot the legs up ward. (Fig. 1A)
2
Place the supplied wheel axle (A) through the respective openings. (Fig. 1A)
3
Put the supplied washer (B) and sleeve (C) onto the wheel axle. (Fig. 1B)
4
Please the wheels (D) and install nut hand tight (E). (Fig. 1C)
5
Using the supplied hex wrench (F) to fix the wheel axle and at the same time firmly lock the
nut by using the wrench (G). (Fig. 1D)
6
Finally, place the wheel cover (H) in the centre of the wheel. (Fig. 1E)
Fig.1A
Fig.1C
Fig.1E
20
www.hyundaipowerproducts.co.uk
Fig.1B
Fig.1D
aftersales@hyundaipowerproducts.co.uk
01646 687 880