Operation
Instructions For Use
Place the material to be shredded in the opening on the right side. It will the be automatically
1
drawn into the machine be the cutter as it turns anticlockwise. Maximum diameter 44mm.
2
Do not stuff the opening completely full to avoid jamming the machine.
3
Alternate feeding branches and small litter that is a bit wet and decomposed. This will also
help to avoid jamming the cutter.
Squashy kitchen rubbish must be composted, never put it through the shredder.
4
5
Branches with leaves must always be entirely through the shredder and out of the way before
feeding new material into the machine. Make sure the shredded material is able to fall
unobstructed into the collection box without blocking the outlet.
6
The ventilation opening must not be locked by the shredded material.
Continuous shredding of thick wood or branches can cause the machine to jam.
7
8
Soft material like leaves or sprigs can easily block the inlet ;use a push stick to poke it in.
9
Always check litter for nails and stones before shredding as they can seriously damage the
shredder.
www.hyundaipowerproducts.co.uk
01646 687 880
aftersales@hyundaipowerproducts.co.uk
23