Advertisement
Installation
1. Install the electrostatic sticker
Clean your windshield and put the electrostatic sticker on the recommended
area as shown in the image.
Make sure you remove air bubbles between the sticker and the glass.
t ick the camera mount to the windshield
2. S
Remove the protective cover from the mount and stick the mount's base to the
center of the electrostatic sticker. Make sure your dash cam body is parallel to
the ground.
Press the mount to attach it to the electrostatic sticker tightly.
3. Connect USB cable to the cigarette lighter receptacle
Align the cable with the top edge of the windshield and fasten it along the
passenger's side and the glovebox as shown right.
Connect the cable to the power adapter and insert the adapter into the
cigarette lighter receptacle.
2
Advertisement
