Advertisement
Quick Links
SPECIFICATIONS
–94.00 to 392.00°F (–69.99 to 199.99°C)
Range
0.01° or 0.1° - user selectable
Resolution
±0.10°F (±0.05°C) from 32 to 212°F (0 to 100°C),
Accuracy
otherwise ±0.36°F (±0.2°C)
1/3 DIN Thin Film PT100 to BS EN 60751 (4 wire)
Sensor Type
4.25 L x 0.125 inches dia. (108 L x 3.3mm dia.)
Probe
10 minutes - user selectable
Auto-Off
32 to 122°F (0 to 50°C)
Environmental Range
2 x 3 volt CR2032 lithium coin cell, 1000 hours
Battery
Display
0.83 H x 1.89 W inches (21 H x 48 W mm) LCD
Dimensions
6.1 H x 1.85 W x 0.75 D inches (153 H x 47 W x 19 D mm)
Weight
0.22lb. (100g)
Calibration
UKAS Accredited Certificate included
ACCESSORIES/RELATED ITEMS
Stainless Steel
Wall Bracket
Wall Bracket
(10203)
(THS-830-002)
For warranty, service, and technical assistance, please contact
ThermoWorks' Technical Support at (801) 756-7705 or email at
techsupport@thermoworks.com.
Made in the UK
Phone: 801-756-7705
P-12-001-02-e
www.thermoworks.com
Protective
Silicone Boot
(THS-830-260)
Utah, U.S.A.
Fax: 801-756-8948
Ref: 547-145 12.02.20
Reference
Thermapen
Operating Instructions
®
Advertisement
Related Manuals for ThermoWorks Reference Thermapen
Summary of Contents for ThermoWorks Reference Thermapen
- Page 1 Wall Bracket Protective Wall Bracket (10203) Silicone Boot (THS-830-002) (THS-830-260) For warranty, service, and technical assistance, please contact ThermoWorks’ Technical Support at (801) 756-7705 or email at techsupport@thermoworks.com. Made in the UK Operating Instructions Utah, U.S.A. Phone: 801-756-7705 Fax: 801-756-8948 P-12-001-02-e Ref: 547-145 12.02.20...
- Page 2 0.1°F push the switch away from the batteries. components or workmanship. During this period, products that prove to be defective will, at the discretion of ThermoWorks, be either repaired or replaced Switch 3 - Auto-off - To disable the auto-off (factory default – 10 minutes) without charge.