Output To Computer; Requirements; Run Ap4 Retrieve On Your Pc - Delta-T Devices AP4 User Manual

OUTPUT TO COMPUTER

OUTPUT TO COMPUTER
This section describes how to output data to a PC.
You can also delete data using the OUTPUT, DISCARD option

REQUIREMENTS

The PC program AP4 Retrieve is used to download data to a PC .
Before installing it on you PC please check latest installation requirements in the
document AP4 Retrieve Release Notes at
retrieve-1-1/
The following instructions apply (at 2019) for use with AP4 Retrieve v 1.1:
To install and use AP4 Retrieve you will need:
•
A PC running Windows XP, Vista, Windows 7, Windows 8 or Windows 10.
•
One free USB port.
•
An AP4 RS232 cable and a USB adapter cable (both supplied with the AP4).

Run AP4 Retrieve on your PC

You need local administrator rights to install AP4 Retrieve 1.1. Please contact your
system administrator for further information.
Download AP4 Retrieve from
When the download completes, right click on AP4Retrieve.exe and select Run as
Administrator.
The installation program creates a copy of AP4 Retrieve on the desktop .
Run the AP4 Retrieve software and follow the onscreen instructions
Figure 1 AP4 Retrieve
● Click Refresh to refresh the list of
available COM ports.
● Remove and reinsert the USB cable
to identify the correct COM port.
● Highlight this COM port and
● Click Next
● Select Browse to choose where to
save results.
● Follow the on-screen instructions.
Page 36
https://www.delta-t.co.uk/software/ap4-
www.delta-t.co.uk