Overload Protection - SNOWJOE Sunjoe AJ801E Operator's Manual

m
WARNING!
objects. Keep your feet and hands a safe distance away from
the rotating tines and the ejector opening. Failure to comply
with these warnings can result in severe personal injury.
1.
with operation (Fig. 11).
2.
lever.
Fig. 11
Switch lever
Safety lock button
m
WARNING!
The tine cylinder continues to run for a
carry the unit while the motor is still running and do not touch
the cylinder while it is still rotating. Failure to comply could
result in severe personal injury.

Overload Protection

The overload protection will be activated in the following
circumstances:
1.
2.
3. Where there is too much resistance against the cutting
device.
product and disconnect from the power supply.
Let the product cool down and eliminate the cause before
using the product again.
General Operation
m
WARNING!
If the product strikes a foreign object stop
supply and let it cool down. Inspect the product thoroughly for
m
WARNING!
Extensive vibration of the product during
operation is an indication of damage. The product should be
promptly inspected and repaired.
accessories for damage before each use. Do not use the
machine if it is damaged or shows wear.
dry to ensure safe support.
clear. Clean them if necessary with a soft brush. Blocked
air vents may lead to overheating and damage the
product.
while working by other people entering the working area.
Always let the machine come to complete stop before
putting it down.
you can concentrate on the work and have full control
over the machine.
other objects that could damage the machine or its motor.
height.
also cause you to slip and fall.
appropriate speed. Do not move it too fast to prevent the
discharge from getting blocked and engine from useless
overloading.
for scarifying/raking lawns is straight lines along one of the
sides. This will keep the rows even and ensures that all the
Fig. 12
10