Sekonic SPECTROMASTER C-7000 Operating Manual page 57

4.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H (
the flash. ( P102,  P103)
Measurements are now displayed.
NOTE
● Measurements and display will take longer in light levels below 30lx. The
LCD illumination will normally switch off during measurements to avoid
influence to measurements.
5.
Current measurements and color vector graphic are displayed.
Default Display Items are Rf, Rg and Tcp, ⊿ uv.
Color vector graphic is the visual representation of hue and chroma shifts around the
hue circle divided by 16.
Color vector graphic shows the current measurement in the red line.
The standard light source is displayed in black slid line, and arrow shows the difference
for current measurement.
White circles with radius shows Rg80, 90, 110 and 120.
Numbers from 1 to 16 represent hue-angle bins divided by 16 in 22.5 degree increment,
which assign from 1 of red to 16 of reddish purple.
TM-30 Screen
6.
Memorize the measurement results.
To record measurements, press Memory Button
❺
to measure.
❷
should be set to L
) depending on the brightness of
Measurement Value Display
Color Vector Graphic Display
45
Light Selection Ring
( )
( )
Measuring Button
❼
. ( P108)
4. Basic Operations
❷
❺