Selecting The Exposure Time (Ambient Modes Only) - Sekonic SPECTROMASTER C-7000 Operating Manual

4-2-2

Selecting the Exposure Time (Ambient Modes Only)

Set a Exposure Time for ambient measurement.
Operation
1.
Touch the [Exposure Time] indication on the Measurement screen.
Touch the [Auto], [0.1 sec] or [1.0 sec] button.
2.
Touch the [OK] button.
Confirms the settings, and returns to the previous Measuring screen.
Touch [Cancel] to return to the previous Measuring screen without setting.
Exposure time is set.
NOTE
● In Auto mode, the C-7000 automatically selects among 15 measuring times,
determined by the illumination available, to achieve a proper result in a convenient
way.
Two fixed reading times are available to enable exact comparison of multiple
measurements.
When measuring high illuminance levels, set the Exposure Time to 0.1 sec.
When taking measurements in low Illuminance, set the Exposure time for 1.0 sec.
NOTICE
● 0.1 sec and 1.0 sec may not cover some measurement range of illumination
and [OVER] or [UNDER] appears. In this case, set Exposure time to "Auto".
Measuring Screen Exposure Time Screen
25
4. Basic Operations
The selected
button will
be displayed
encircled in
blue.
[OK]
Button
[Cancel]
Button