ZyXEL Communications ZyXEL ZyWALL USG-1000 Quick Start Manual page 6

6 Default Settings and Port Details
The ZyWALL is configured for the following network topology by default.
Port Interface Zone IP Address and DHCP Settings
P1 ge1
P2, P3 ge2, ge3
P4, P5 ge4, ge5
AUX aux
CONSOLE N/A
Label
P1~ P5
AUX, CONSOLE
Note: The USB ports, extension card slots, and hard disk slot are reserved for future use.
LAN 192.168.1.1, DHCP server enabled Protected LAN
WAN DHCP clients
DMZ None, DHCP server disabled
None None
None None
Type Cable to Use
RJ-45 8-wire Category 5e or above Ethernet cable
RS-232 RS-232
ENGLISH
Suggested Use With Default Settings
Connections to the Internet
Public servers (such as web, e-mail and
FTP)
Auxiliary modem
Local management
6