Mini CONVERTIBLE COOPER Owner's Manual page 160

CONTROLS
Interrupting manually
Press the button on the steering
wheel.
Interrupting automatically
The system is automatically interrupted in
the following situations:
– When the driver applies the brakes.
– Manual transmission: when the clutch
pedal is depressed for a few seconds or
released while a gear is not engaged.
– If selector lever position N is set.
– Dynamic Traction Control DTC is acti-
vated or DSC Dynamic Stability Control
is deactivated.
– If DSC Dynamic Stability Control inter-
venes.
– If the detection range of the camera is
impaired, for instance by soiling, heavy
precipitation or glare effects from the
sun.
– If the vehicle in front decelerates below
a speed of approx. 20 mph/30 km/h.
Setting the speed
Maintaining/storing the speed
Press or button in the interrupted
state.
When the system is switched on, the cur-
rent speed is maintained and stored as the
desired speed.
Instrument cluster without enhanced
features:
The stored speed is displayed by the
symbol in the Info Display of the instrument
cluster.
DSC Dynamic Stability Control is switched
on, if necessary.
The speed can also be stored as follows:
160
Driving comfort
Online Edition for Part no. 01405A02757 - II/20
Press the button.
Changing the speed
or button: press until the desired
speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when
the road is clear.
– or button: each time it is pressed
to the point of resistance, the desired
speed increases or decreases by approx.
1 mph/1 km/h.
– or button: each time it is pressed
past the resistance point, the desired
speed changes by a maximum of 5 mph/
10 km/h.
or button: hold down to repeat the
action.
Adjusting the distance
Safety information
Warning
The system cannot serve as a substitute
for the driver's personal judgment. Due to
the system limits, braking can be late.
There may be a risk of accident or risk of
damage to property. Be aware to the traffic
situation at all times. Adjust the distance
to the traffic and weather conditions and
maintain the prescribed safety distance,
possibly by braking.
Reduce distance
Press the button repeatedly until
the desired distance is set.
Instrument cluster without enhanced
features: