Installation - Progress PM20800X User Manual

50 Progress
Problem
The appliance does
not operate.
The appliance does
not operate.
The lamp does not
operate.
The display shows
.
There is sparking in
the cavity.
There is sparking in
the cavity.
The turntable set
makes scratching or
grinding noise.
The appliance stops
operating without a
clear reason.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

WARNING! Refer to Safety
chapters.
Possible cause
The fuse in the fuse box is
blown.
The door is not closed properly.
The lamp is defective.
The Child Safety Lock is active.
There are metal dishes or
dishes with metal trim.
There are metal skewers or alu‐
minium foil that touches the inte‐
rior walls.
There is an object or dirt below
the glass cooking tray.
There is a malfunction.
Remedy
Check the fuse. If the fuse
blows more than one time, con‐
tact a qualified electrician.
Make sure that nothing blocks
the door.
The lamp has to be replaced.
Deactivate the Child Safety
Lock. Hold
Remove the dish from the appli‐
ance.
Make sure that the skewers or
foil do not touch the interior
walls.
Clean the area below the glass
cooking tray.
If this situation repeats call the
Authorised Service Center.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the appliance. Do not remove the
rating plate from the appliance.
........................................
........................................
........................................
Electrical installation
WARNING! Only a qualified
person must do the electrical
installation.
for 3 seconds.