PotteryBarn Mason Mirror with Shelf Assembly Instructions

Please read all instructions before beginning assembly.
For your safety and convenience, assembly by two people is recommended.
Use the parts and hardware lists to identify and separate each of the components included.
Save all packing materials until assembly is complete to avoid the accidental discarding of smaller parts or

hardware.

TOOLS(Provide by Customer):
Phillips screwdriver

PARTS:

HARDWARE:
(2) Metal Screws (Ø 1/4" x 2") –a

Mounting Instructions:

1. There is vertical and horizontal hanging style to choice. Determine your desired hanging
style and location. Measure the distance between the d-rings on the back of the mirror,
making sure the measurements are taken from the centers of both d-rings.
2. Record this measurement on the wall with a pencil. Use a carpenter's level and a tape
measure to ensure a level installation.
3. Stud mounting is always best, so try to position the d-rings over studs if possible. Use a stud
finder to locate a stud in desired location. If any of the d-rings align with stud, use provided
metal mounting screws. If there is no stud, the wall anchors/metal screws are both required.
Mason Mirror with Shelf
Assembly Instructions
Pencil
(1) Mirror - A
(2) Wall Anchors - b
Page 1 of 2