Table of Contents
Advertisement
The 16 Relay I/O Card can be installed in any of the PC expansion slots. Windows
98/Me/XP, Windows NT
To install the card:
1. Turn off all PC power and disconnect the power cord.
2. Remove the cover of the PC.
3. Locate an available slot and remove the blank metal slot cover.
4. Gently insert the 16 Relay I/O Card into the slot. Make sure the card is
seated properly.
5. Replace the PC's cover.
6. Connect the power cord.
Installation is complete.
4. Installation
®
, and Windows 2000 drivers are included.
CHAPTER 4: Installation
®
13
Advertisement
Table of Contents
