Installation; Overview; Software Installation; Windows Users - Black Box IC909C Manual

RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS

3.1 Overview

The Relay/Digital I/O Card PCI is a fully compliant PCI plug-and-play adapter. All
card resources (I/O address, IRQ selection) are auto-assigned by either your
system BIOS or your plug-and-play operating system.

3.2 Software Installation

3.2.1 W U
INDOWS SERS
Choose Install Software at the beginning of the CD and select the Digital I/O
software drivers and install SeaI/O.
3.2.2 L U
INUX SERS
Refer to the installation instructions at the beginning of the CD for details on
installing the digital I/O cards in Linux

3.3 System Installation

The Relay/Digital I/O Card PCI can be installed in any of the PCI expansion slots.
1. Turn off the PC's power. Disconnect the power cord.
2. Remove the PC's case cover.
3. Locate an available PC slot and remove the blank metal slot cover.
4. Remove the clamping portion of the bracket from the card.
5. Gently insert the Card into the slot. Make sure that the Card is seated
properly.
6. Feed the two 50-pin ribbon cables through the cutout bracket and connect
them to the card.
7. Replace the bracket retaining screw.
8. Install the clamping portion of the bracket.
9. Replace the computer cover.
8

3. Installation

® .