Black Box IC909C Manual
Black Box IC909C Manual

Black Box IC909C Manual

Relay/digital i/o card pci 48 inputs or outputs
Hide thumbs Also See for IC909C:

Advertisement

Quick Links

OCTOBER 2001
IC909C
Relay/Digital I/O Card PCI—
48 Inputs or Outputs
CUSTOMER
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
SUPPORT
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
INFORMATION
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com

Advertisement

Table of Contents
loading

Summary of Contents for Black Box IC909C

  • Page 1 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) SUPPORT FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 INFORMATION Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com...
  • Page 2 FCC AND IC RFI STATEMENTS/CE NOTICE FEDERAL COMMUNICATIONS COMMISSION INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
  • Page 3 RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
  • Page 4 NOM STATEMENT 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
  • Page 5 RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS TRADEMARKS USED IN THIS MANUAL Linux is a registered trademark of Linus Torvalds. ® Windows ® and Windows NT ® are registered trademarks of Microsoft Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
  • Page 6: Table Of Contents

    A.2 Calling Black Box ........
  • Page 7: Specifications

    RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS 1. Specifications Channels: (48) input or output Current (Maximum): 24 mA DC Signal: TTL compatible address, data, and control Throughput (Maximum): 600 Hz MTBF: >150,000 hours (calculated) Temperature Range: Operating: 32 to 122°F (0 to 50°C); Storage: -4 to +158°F (-20 to 70°C) Relative Humidity: Operating and Storage: 10 to 90% noncondensing;...
  • Page 8: Introduction

    2.2 What the Package Includes Your package should contain the following items: • Relay/Digital I/O Card PCI—48 Inputs or Outputs • (1) CD-ROM containing SeaI/O software • This users’ manual If anything is missing or damaged, please contact Black Box at 724-746-5500.
  • Page 9: Installation

    RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS 3. Installation 3.1 Overview The Relay/Digital I/O Card PCI is a fully compliant PCI plug-and-play adapter. All card resources (I/O address, IRQ selection) are auto-assigned by either your system BIOS or your plug-and-play operating system. 3.2 Software Installation 3.2.1 W INDOWS...
  • Page 10 CHAPTER 3: Installation 10. Connect the power cord. Installation is complete.
  • Page 11: Technical Description

    RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS 4. Technical Description The Relay/Digital I/O Card PCI provides 48 channels of digital I/O configurable as inputs or outputs. Use the channels for PC-based control and automation including sensors, switches, satellite antenna control systems, video and audio studio automation, security control systems, and other industrial automation systems.
  • Page 12: Register Description

    CHAPTER 4: Technical Description 4.4 Register Description Address Mode Base+0 Port A1 RD/WR PA1D7 PA1D6 PA1D5 PA1D4 PA1D3 PA1D2 PA1D1 PA1D0 Base+1 Port B1 RD/WR PB1D7 PB1D6 PB1D5 PB1D4 PB1D3 PB1D2 PB1D1 PB1D0 Base+2 Port C1 RD/WR PC1D7 PC1D6 PC1D5 PC1D4 PC1D3 PC1D2 PC1D1 PC1D0...
  • Page 13: Control Words

    RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS 4.5 Control Words n = control word for port 1 or 2 4.5.1 I/O C ONFIGURATION CWnD0 Port C1 lower nibble (bits 0–3) 1=input 0=output 1 on power up CWnD1 Port B1 1=input 0=output 1 on power up CWnD2...
  • Page 14: Bit Set Or Reset Portc

    CHAPTER 4: Technical Description 4.5.2 B ET OR ESET n = port number CWnD0 1 = set to +5V 0 = Reset to GND CWnD4 0 or 1 (no effect) CWnD5 0 or 1 (no effect) CWnD6 0 or 1 (no effect) CWnD7 Always a zero when using Bit set/reset Bit Select...
  • Page 15: Interrupt Control

    RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS Control Word (X=0) Hex Value Port C Reset 4.5.3 I NTERRUPT ONTROL IRQENX interrupt enable 1=enabled 2=disabled (0 on power up) IRQCX0 Interrupt mode select (see table in Section 4.5.4) IRQCX1 Interrupt mode select (see table in Section 4.5.4) 4.5.4 I NTERRUPT ELECT...
  • Page 16: Interrupt Read

    CHAPTER 4: Technical Description 4.5.5 I NTERRUPT Reading this port clears the interrupt. IRQST1 (D0) Interrupt status 1 = interrupt pending, 0 = none IRQST2 (D4) Interrupt status 1 = interrupt pending, 0 = none 4.6 50-Pin Ribbon Cable Pinout Description Pin # Port A...
  • Page 17: Appendix A. Troubleshooting

    If you determine that your Relay/Digital I/O Card PCI—48 Inputs or Outputs is malfunctioning, do not attempt to alter or repair the unit. It contains no user- serviceable parts. Contact Black Box at 724-746-5500. Before you do, make a record of the history of the problem. We will be able to...
  • Page 18: Shipping And Packaging

    • Package it carefully. We recommend that you use the original container. • If you are shipping the Relay/Digital I/O Card PCI for repair, make sure you include everything that came in the original package. Before you ship, contact Black Box to get a Return Authorization (RA) number.
  • Page 19: Appendix B. Board Layout

    RELAY/DIGITAL I/O CARD PCI—48 INPUTS OR OUTPUTS Appendix B. Board Layout Figure B-1. Board layout.
  • Page 20 © Copyright 2001. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...

Table of Contents