Table of Contents
Advertisement
Fitting tips - Strap facing outward or inward?
The strap side of the connector sticks out a little bit, so it needs slightly more clearance
space. If both sides of the connector have space (this means they are not touching
the wheels or moving parts) then this is not an issue.
1. Outward = facing the wheel.
ATTENTION: DO NOT attach the connector upside down (i.e. with the quick release
slider underneath)!
Fitting tips - Fold it first
2. Inward = the two straps will be facing
each other.
1. Does your pushchair still fold with the
connector on the legs?
Fold it first. Then try to find a place
on the legs where the connector
will fit.
Now try to open and close the
pushchair. If the connector
obstructs this action, then
reposition it on the legs. (SEE
NOTE BELOW).
There may be more than 1 place
where the connector fits that still allows the
pushchair to fold.
page 14
Advertisement
Table of Contents
Need help?
Do you have a question about the On Board and is the answer not in the manual?
Questions and answers
Wheels won't click in
The wheels may not click in on the My Child On Board if the wheel housing washers are missing or not correctly placed. If the washers are loose in the box or in the bag with the storage strap, they must be inserted into the wheel housing before attaching the wheels.
This answer is automatically generated