Table 162 RFC-2408 ISAKMP Payload Types (continued)
LOG DISPLAY
SIG
NONCE
NOTFY
DEL
VID
Log Commands
Go to the command interpreter interface.
Configuring What You Want the Prestige to Log
1 Use the sys logs load command to load the log setting buffer that allows you to configure
which logs the Prestige is to record.
2 Use sys logs category to view a list of the log categories.
Figure 269 Displaying Log Categories Example
3 Use sys logs category followed by a log category to display the parameters that are
available for the category.
Figure 270 Displaying Log Parameters Example
4 Use sys logs category followed by a log category and a parameter to decide what to
record.
Appendix L
PAYLOAD TYPE
Signature
Nonce
Notification
Delete
Vendor ID
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras>?
Valid commands are:
sys
exit
ip
ipsec
certificates
cnm
ras>
ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/
1:show debug type]
P-660H/HW-T Series User' Guide
ether
aux
bridge
bm
8021x
radius
428