Sony SU-HX85L Instructions Manual page 4

Step 4:
Safety measures to
prevent toppling over
WARNING
Be sure to take measures to prevent the TV Stand
from toppling over, and causing possible injury
and damage.
1 Install a wood screw (4 mm in diameter,
not supplied) in the board.
2 Install a machine screw (M4, not supplied)
into the screw hole of the TV Stand.
3 Tie the wood screw and the machine screw
with a strong cord (not supplied).
The length of the M4 machine screw differs
depending on the cord diameter.
Please see below illustration.
6-8 mm
4
GB
Screw M4
Cord
TV Stand