Table of Contents
Advertisement
1. Introduction
Take advantage of the Wi-Fi connection when you on the go. The NWD-490 SDIO
802.11g wireless client adapter provides high-speed wireless connection to your PDA
or Smart phone. If your pocket PC does not have the built-in Wi-Fi function, or the
built-in 802.11b wireless module keeps you waiting when you need to get e-mail
attachment, then the NWD-490 with 54 Mbps data rate is the solution for you.
1.1 Minimum System Requirements
•
PDA or Smart phone equipped with SDIO slot.
•
The supported OS are PC 2003, Mobile 4.2/5.0
1.2 Installation Overview
1.
Install SDIO driver via Active Sync® to the PDA or Smart Phone.
2.
Insert the NWD-490 SDIO Wireless Adapter.
3.
Select ZyXEL SDIO Wireless Adapter as Network adapter in PDA.
4.
Configure wireless security settings if needed.
2. Software Installation
Do not insert ZyXEL NWD-490 into the SDIO slot of your PDA until
the Driver installation has been performed.
1.
Connect your PDA to your computer and make sure Active-Sync® has
established a connection between the two devices.
2.
Insert the support CD into the CD-ROM drive on your computer.
ZyXEL NWD-490 User Manual
2
Advertisement
Table of Contents
