Software Tool
4-5 Connection and disconnection procedures
Refer to "2-3 Connections" to connect the device to your PC and have your PC find the de-
vice. This procedure is valid both before or after the software tool is started as explained in the
next section.
The power indicator (green) of the device operates as indicated below when the device is con-
nected to a PC and to the light curtain.
Device connection destination
PC
Not connected
Connected
Not connected
Connected
The device is intended to be connected to the light curtain temporarily for the purpose of configur-
ing light curtain functions and diagnosing problems. The device is not intended to be connected
permanently to the light curtain.
30
Light curtain
Not connected
Not connected
Connected
Connected
Power indicator (green)
OFF
○
CAUTION
© Panasonic Industrial Devices SUNX Co., Ltd. 2020
Blinking
○
ON
○
○