Advertisement
Quick Links
Advertisement
Related Manuals for Therma-Stor Humidity Alert 4026208
Summary of Contents for Therma-Stor Humidity Alert 4026208
- Page 1 Humidity Alert™ Thermometer/Hygrometer Clock P/N 4026208...
- Page 2 Operating instructions for the Humidity Alert™ Temperature / RH Meter / Clock General Characteristics Displays: 1. 50% - 80% Relative Humidity 2. Days of high humidity from 0 - 199 3. Accumulated hours of high humidity from 2 – 12 4.
- Page 3 6. 2 AA (1.5V) batteries 7. Operates independently from other appliances Basic Operation Click the “Off” button to turn the unit on and off. To change the Time of day (am/pm), Relative Humidity (RH%) and Hours of continuous high RH, press the “Set” button and then press the “+ or –“ buttons to adjust each selection accordingly.
- Page 4 AFTER MONITORING FOR 199 DAYS, THE METER WILL NEED TO BE RESET BY DEPRESSING THE “+” AND “-” BUTTONS AT THE SAME TIME. THIS WILL RESET THE “DAYS” AND “HOURS” DISPLAY TO 0, BUT WILL NOT CHANGE THE PREVIOUSLY SELECTED “ALERT” SETTINGS. Removing the batteries clears all stored data and clock settings.
- Page 5 Each function will be displayed automatically through a continuous rotation cycle. If you turn the meter off, all settings will remain in place. Alarm will not sound. At default settings, if RH exceeds 60% for 12 continuous hours, alarm will sound for 5 seconds.
- Page 6 When the RH and hours are exceeded, the alarm will sound for 5 seconds and then every 30 minutes, regardless of the current %RH. The meter continues to monitor conditions, accumulating the total hours of continuous high humidity at the set point. If the moisture level falls below the set point, the accumulation of hours stops until the %RH again exceeds the set point.
- Page 7 For example: Assume you have selected 60%RH and 12 hours for your set points. The alarm is activated after humidity exceeds 60% for 12 continuous hours. The continuous hours are tracked and displayed until the humidity falls below the alarm level (60%RH). If the RH falls below 60%, the hour count stops. If the humidity exceeds the set point again for a period of 12 continuous house, the total hours of continuous high humidity are added to the previous 12 hours to total 24.
-
Page 8: De-Activating The Alarm
De-Activating the Alarm To stop the alarm, press either the “+,– “ or “Set” buttons. Resetting the Alarm Depressing both the “+,–“ buttons at the same time for 5 seconds to reset the hours and days to 0. The previous settings are retained. Adjustable Settings The available set-points are as follows: 2-4-6-8-10-12 hours and 50%, 55%, 60%, 65%, 70%, 75%, &... - Page 9 Recommended Settings We suggest alarming for +70%RH and 12 hours to avoid nuisance alarms. If concerned about dust mites in carpeting on concrete, we suggest 60%RH and 12 hours. Severe Mold — RH: 70%, Duration: 12 Hours Moderate Mold — RH: 65%, Duration: 12 Hours Dust Mites —...
- Page 10 Turning the Meter Off Pressing the “OFF” button blanks the display but the unit retains the stored information. Pressing the “OFF” button again reactivates the %RH hour timer from 0 while retaining the previous accumulated days and hours of high humidity set point information.
- Page 11 P.O. Box 8680 Madison, WI 53708 TOLL-FREE 1-800-533-7533 • For small usage: www.thermastor.com sales@thermastor.com •...
Need help?
Do you have a question about the Humidity Alert 4026208 and is the answer not in the manual?
Questions and answers