Operation Instructions; Operation - ZIPPER MASCHINEN ZI-CRM40V-AKKU User Manual

13

OPERATION

Machine to be operated in a perfect state only. Inspect the machine visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating the
device.
13.1

Operation instructions

Unplug battery and safety switch (if equipped) before all maintenance and
settings!.
Never remove the battery while the machine is running.
Insert the safety switch only when using the machine!
Always use the grass box when using the mower
13.2 Operation
Installing grass box:
Open the rear discharge door.
Lift the grass box by its handle and place under the rear door, so
that the hooks on the grass box frame are seated into the slots
provided in the handle bracket. . Release the rear door. When
installed correctly, the grass box will fit snugly against the rear
of the mower and the rear discharge door will fit into the recess
in the top of the grass box.
Indicator grass box:
The grass box has an indicator on the side of the box.
If the indicator is lifted when mowing the grass box is empty.
If the indicator is closed the grass box must be emptied.
Inserting battery:
Open the battery compartment. Insert the battery into the slots
and slide into place until the battery locks into place.
Inserting safety switch:
Plug in the safety switch on his slot.
If the machine is not going to be used immediately,
unplug the safety switch!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-CRM40V-AKKU
WARNING
NOTICE
OPERATION
22