PLACEMENT
Accurate Timbre
For the most accurate and natural timbre, position speaker so that sound from the high-frequency
drivers reaches the listener at approximately ear level. Keep in mind, your speaker will allow for
higher than usual placement of the high-frequency drivers, a particularly important feature when
wall mounting.
CONNECTION
Make sure to turn your amplifier off before making or breaking any signal connections! Millenia
LP Trio is designed with easy-to-use push-style binding posts that accept bare wire or pins. Assign
the same colour to the (+) and (-) terminals on both the speaker and the amplifier. Make certain
that all connections are tight.
The following chart identifies the minimum gauge requirements for various cable lengths:
LENGTH
Under 4.5 m (15 ft)
Under 9 m (30 ft)
Over 9 m (30 ft)
4
MINIMUM GAUGE REQUIREMENTS
DIAMETER
1.3 mm (0.05 in)
1.6 mm (0.06 in)
2.0 mm (0.08 in)
GAUGE
16 awg
14 awg
12 awg