ZyXEL Communications NSA210 User Manual page 384

Appendix A Setting up Your Computer's IP Address
Double-click on the profile of the network card you wish to configure. The
2
Ethernet Device General screen displays as shown.
Figure 179 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address, click Automatically obtain IP address
settings with and select dhcp from the drop down list.
• If you have a static IP address, click Statically set IP Addresses and fill in
the Address, Subnet mask, and Default Gateway Address fields.
Click OK to save the changes and close the Ethernet Device General screen.
3
If you know your DNS server IP address(es), click the DNS tab in the Network
4
Configuration screen. Enter the DNS server information in the fields provided.
Figure 180 Red Hat 9.0: KDE: Network Configuration: DNS
384
NSA210 User's Guide