Assembly - Royal Sovereign PRO HWS-480 Owner's Manual

Assembly

WALL MOUNT APPLICATION
Remove Heater and all packing material from the box.
Tools Required
▪ Power drill
Attaching Heater to Wall/Ceiling
1. Line up both holes on bracket with both holes on the heater handle.
2. Attach heater to bracket with 20mm screw and nut, 10mm washer and locking washer.
3. Locate wood stud in wall or joist in ceiling to mount heater.
4. Use holes in bracket to mark 2 holes for drilling.
WARNING: USE THIS HEATER ONLY AS
DESCRIBED IN THIS MANUAL. ANY OTHER USE
NOT RECOMMENDED BY THE MANUFACTURER
IS STRICTLY PROHIBITED AND MAY CAUSE FIRE,
ELECTRIC SHOCK, OR INJURY TO PERSONS
▪ 4mm or 5/32in drill bit
CEILING MOUNT APPLICATION
▪ Phillips head screwdriver
Next pre-drill 2 holes for screws.
7