Royal Sovereign HFN-50D Owner's Manual page 4

TEMPERATURE SETTING
Temperature can be adjusted between 5°C to 35°C (42°F to 95°F).
6) indicates the current room temperature.
temperature.
1. To change the temperature, press the temperature buttons + or – ( Figure 3)
Note: In Low or High Heat Mode, the unit will cycle on and off to maintain the set temperature. In
AUTO mode, the unit will automatically adjust its heat output between LOW and HIGH setting to
attain the desired room temperature..
OSCILLATION SETTING
Press the button to oscillate the heater. Press again to turn oscillation off
CELSIUS AND FARENHEIT SETTING
To switch the display between Fahrenheit and Celsius, press the "-" (Temperature and Timer Adjustment
Button - Figure 3) for 5 seconds
TIMER MODE
You can set the timer from 1 minute up to 23 hours and 59 minutes. Press the timer button once to
adjust the minute. Press the button a second time to adjust the hour. Press the button a third time to
set the timer
To turn off the timer mode, continuously adjust the timer until the display shows "00:00"
MEMORY FUNCTION
The unit has built-in memory function and will keep the previous setting as long as the unit is plugged into
the electrical outlet.
4
The number at the top (Figure 5) indicates the set
The number at the bottom (Figure