ZyXEL Communications NSA-2400 Quick Start Manual page 6

Network storage appliance

Hide thumbs Also See for NSA-2400:

Table of Contents

3 Right-click Local Area Connection and then click Properties.

4 Select Internet Protocol (TCP/IP) (under the General

tab in Win XP) and click Properties.

5 The Internet Protocol TCP/IP Properties screen opens

(the General tab in Windows XP).

6 Select the Use the following IP address and enter an IP

address from 192.168.1.1 to 192.168.1.254 excluding

192.168.1.3 (the NSA) and any other IP addresses in this

range already being used by a device on your network.

7 Click OK to close the Internet Protocol (TCP/IP)

Properties window.

8 Close the Local Area Connection Properties window

and then the Network Connections screen.

9 Launch your web browser and enter "192.168.1.3" as the

web site address.

4 NSA Wizard Setup

1 Access the NSA using the NDU or web configurator directly.

2 When you first access the NSA web configurator, you may see

this screen telling you that this is a secure connection using

HTTPS. Click OK to continue.

NSA-2400 Quick Start Guide

Table of Contents