Zoom 8080 Operation Manual page 40

3'
If "PATCH" was
selected, use
Data entry knob
3 to set
the desired patch
number in the "PAT="
item.
4 Press the
STORE/EXECUTE key
times.
5
Press the
USER FUNCTION switch
playing the instrument
in Play mode.
If Utility mode settings are not stored, they will remain active only until the unit is next turned off. When turned on again,
NO
the unit reverts to the previous settings. If you wish to keep changes you have made, do not forget to press the
STORE/EXECUTE key twice to perform the store process. Note that any edited patch will also be stored at this time.
The Utility mode settings are stored
and the unit returns to the Play
two
mode.
The preset bank number or patch
number will be called up.
while
USER FUNCTION= PATCH
3 PAT=U09
01 8080LEAD LVL=100
AMP ¡VOL ™OFF ßHLD
39