Basic Setting; Initialization Of Lx006/Sr; Communication Id Setting - IDTECK LX006 User Manual

BASIC SETTING

1

INITIALIZATION OF LX006/SR

Initialization should be performed before mounting the LX006/SR to the Wall Mount.
●
If you need to initialize LX006/SR after installing it on the wall, you can use the Applicati
●
on Software to do that. (Refer to the Software Manual for more information.)
For more information about how to initialize the LX006, refer to '7.3 SYSTEM INITIALIZA
●
TION'.
If the Controller is initialized, all data stored in the Controller will be cleared and th
e default setting values (factory setting values) will be reloaded. Therefore, the Initi
alization should be performed by authorized person only. It is strongly recommend
ed to upload all events data before initialization.
2

COMMUNICATION ID SETTING

The LX006/SR can upload or download user's fingerprint data using the Application Soft
●
ware. You can also customize the settings of LX006/SR for your needs.
There is one 8 channel DIP switch on the back of FGR006/SR unit for communication ID
●
setting.
Each channel of DIP switch has assigned address value. The communication ID is calcula
9
p.29