Proper Use; Operation; Cleaning And Care - Beurer FWM 40 Instructions For Use Manual

• Do not pull on, twist or sharply bend the cables.
• Do not stick pins, needles or sharp objects into this footwarmer.
• This footwarmer may not be used by children unless the switch has been preset by a parent
or supervisory person, or the child has been sufficiently instructed on how to use this foot-
warmer.
• Children should be supervised to ensure that they do not use the footwarmer as a toy.
• Only use the original mains adapter enclosed: P-046 B.
• This footwarmer must be checked often for signs of wear or damage. If signs of this kind are
discovered, if the cables are damaged or if this footwarmer has been used improperly, it must
be taken either to the manufacturer or the dealer before further use.
• Repairs may only be carried out by specially trained personnel at a repair workshop, as special
tools are required. Incorrect repairs can lead to considerable danger to the user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper Use

This product is intended for warming and massaging human feet. Do not use the footwarmer
while wearing shoes, as this will decrease your sensitivity to heat and soil the footwarmer. This
footwarmer is not intended for use in hospitals or for commercial applications. In particular, it may
not be used for infants, small children, persons insensitive to heat, helpless persons or animals.
The footwarmer may smell of plastic when used for the first time, but this soon stops.

3. Operation

3.1 Selecting temperature
The footwarmer heats up most quickly when you initially set the highest temperature level (level
2). It can then be turned down again as required.
Of course, the footwarmer can always also be used while switched off, because its 'teddy-bear'
plush will warm the user's feet even if there is no electrical outlet nearby.
3.2 Switch positions
– Only massage: (
Level I (low): calming massage
Level II (high): invigorating massage
the heat switch is on "0"
– Only heat: (
)
Level I: minimum warmth
Level II: maximum warmth
the massage switch is on "0"
– Massage with heat: (
massage and heat levels are freely selectable
– No massage, no heat:
both switches are on "0"
The massage function may only remain switched on for a maximum of 20 minutes.

4. Cleaning and Care

The footwarmer should be kept clean, as it may not be washed.
• Always disconnect the power plug from the socket outlet before cleaning the footwarmer.
• Smaller stains can be removed with a cloth or damp sponge, and if necessary, some liquid
)
)
,
6