Advertisement
Available languages
Available languages
1 - Technical specifications
Power input
Audio input
Fade time
Fuse
Dimensions
Weight
2 – Controls and functions
1. POWER SWITCH
2. CHANNEL FLASH button: press to activate channel full on.
3. CHANNEL DIMMER control: this control adjusts the dimming level of corresponding channel.
4. MODE SELECT button: press the button you can select desired mode from Hold dimmer/Hold
5. PROGRAM SELECT button:press the button to select desired program from 42 preset program in
6. FADE TIME control: the slider adjusts the delay time .it is not Effective in Hold sound and
memory.
7. STAND BY INDICATOR: press STAND BY the indicator blink.
8. STAND BY button: the button will force all output to "0"
9. MASTER DIMMER control: the fade adjusts the dimming level of all output.
10. AUDIO control: the fade adjusts the sensitivity of music rhythms by the built in microphone or
11. FULL ON button: the button will activate full on of all output.
12. SPEED control: the fader adjusts the chasing speed.
13. TAP SYNC button: the button is effective only in Prog Speed and Auto Speed it is used to define
14. SPEED INDICATOR: the indicator indicates the chasing speed.
15. AUDIO LEVEL INDICATOR: the indicator indicates master dimming level
17. PROGRAM DISPLAY: shows desired pre-set digit parameter.
18. PROGRAM INDICATOR: the indicator indicates the operating mode being executed.
19. CHANNEL DIMMER INDICATOR: the indicator indicates the dimming level of corresponding
Sound /Prog sound/Prog speed/Auto sound/Auto Speed/Memory and
Music control form line input or built-in microphone.
Prog speed/Auto speed/Auto sound. In Memory mode, you can press
to activate sub-mode to select desired operating mode from
Program/Manual/Auto sound/Auto speed Using standby.
line in.
chasing speed. When you press the button twice in 10minutes,the interval
between two pressing will be assigned to chasing speed.
channel.
8
AC230V~50Hz, 16A
100mV-1Vpp
0-10 seconds
T6.3A 250V 5X20mm
482X132X126.5MM(19"X3U)
3.9 kg
Advertisement
