Advertisement
Available languages
Available languages
1 – Technical specifications
Power input
Power out put
Analog input
Power supply
DMX input
DMX output
Fuse
Circuit breaker
Dimensions
Weight
2 – Controls and functions
1. You must fixed the unit, then put the circuit breaker on off according to the diagram to connect the
analog controller or DMX controller. Analog controller with 8Pin cable and DMX controller with
special cable. Put the output of controller to minimum.
2. Connect loading on output sockets.
3. All connection are ok; you can connect to main power then turn on the circuit breaker.
4. To adjust the output of controller, the corresponding load from black to light.
5. DMX controller and analog controller can be used together. Which single is stronger, which single
control output loading.
AC 230V~50Hz, 16A
per channel 5A, total 16A
0-10V
15V, 500 mA
3Pin XLR male socket
3Pin XLR female socket
T6.3A 250V, 5X20MM.4 purchase
16A
318X165X96MM
3,5 Kg
7
Advertisement
