Advertisement
Thank you for purchasing your new CLARKE swing arm magnifying lamp, which is ideal for, fine
detail assembly and repair work, stamp collectors, model makers, jewellers, etc.
Before using this product, read this leaflet thoroughly, and follow the instructions carefully.
Although the product is of rugged construction, it should nevertheless be used with care and
consideration, you can then look forward to it giving long and reliable service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from
the date of purchase. Your receipt is required as proof of purchase. This guarantee is invalid if
the product is found to have been abused, or tampered with in any way, or not used for the
purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us
without prior permission. This guarantee in no way effects your statutory rights under common
law.
ELECTRICAL CONNECTIONS
This product is supplied with a 13 amp, BS 1363 plug, for connection to a domestic 240 Volt
(50Hz) electrical supply. Should it be necessary to renew the plug at any time, ensure the
replacement is of identical specification.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:
Green & Yellow -Earth
As the colours of the flexible cord of this appliance may not correspond with the coloured
markings identifying terminals in your plug proceed as follows:
Connect GREEN & YELLOW cable to terminal marked with a letter "E" or Earth
symbol "
" or coloured GREEN or GREEN & YELLOW.
Connect BROWN cable to terminal marked with a letter "L" or coloured RED.
Connect BLUE cable to terminal marked with a letter "N" or coloured BLACK.
In the event that this product is fitted with a plug which is moulded onto the electric cable (i.e..
non-rewirable) please note:
1.
The plug must be thrown away if it is cut from the electric cable. There is a danger of
electric shock if it is subsequently inserted into a socket outlet.
2.
Never use the plug without the fuse cover fitted.
3.
Should you wish to replace a detachable fuse carrier, ensure that the correct replacement
is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local dealer or most electrical
stockists. 5. If the mains cable becomes frayed or damaged in any way, do not use the
lamp until it has been replaced. Contact your local dealer for a replacement part.
Fuse Rating. The fuse in the plug is 3 amps, and must be replaced with one of the same rating
and ASTA approved to BS 1362.
Blue - Neutral
2
Brown - Live
Advertisement
