Related Manuals for Clarke SAM75B
Summary of Contents for Clarke SAM75B
- Page 1 SWING ARM MAGNIFYING LAMP MODEL NO: SAM75B PART NO: 5460522 ASSEMBLY & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0717 - ISS 2...
-
Page 2: Environmental Recycling Policy
INTRODUCTION Thank you for purchasing your CLARKE swing arm magnifying lamp, which is ideal for fine detail assembly and repair work, stamp collectors, model makers, jewellers, etc. Please note that this product is designed for indoor use only. Before using this product, read this leaflet thoroughly, and follow the instructions carefully. -
Page 3: Electrical Connections
ELECTRICAL CONNECTIONS WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. -
Page 4: Assembly And Operation
ASSEMBLY AND OPERATION ASSEMBLY Your lamp is supplied in two parts;- • The lamp assembly with adjustable arms, • The clamp/holder. 1. Fit a lightbulb (E27 type, - not supplied) to the lamp. 2. Slide the lamp assembly spigot into the holder. SETTING UP The clamp can be mounted on surfaces with varying angles and... -
Page 5: Specifications
Do not attempt to repair or modify this product or attempt any electrical repair yourself. Consult a qualified electrician or the Clarke Service Department on 020 8988 7400. SPECIFICATIONS... -
Page 6: Component Parts
COMPONENT PARTS Item Description Item Description Head Housing Elbow Screws 4” Glass Lens Spring Bottom E27 Lampholder Stem Head Connection Bolt Screw Upper Plate Clamp Base Upper Screws Clamp Bottom & Bolt Box Tube On/Off Switch Upper Spring Plug & Cable Elbow Plate Parts &... -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the SAM75B and is the answer not in the manual?
Questions and answers