Advertisement
STEP 4 – MOUNT THE SOURCE UNIT
Refer to the mounting instructions included with your Source Unit to secure it to the RZR-
DASHR
STEP 5 – WIRE IT UP
Depending on your audio components and system, you can now wire up power, ground and
accessory connections. For audio, connect amplifiers and/or speaker connections.
STEP 6 – TEST & TUNE
Reconnect the battery for a moment while you power up your system and confirm everything is
working. Disconnect battery for reassembly of the RZR.
STEP 7 – REASSEMBLY
Reassemble the Dash making sure that gauge, headlight and 4WD switch connectors are
plugged into the appropriate switches. Use (2) T-40 Torx Screws to secure the dash.
STEP 8 - SHOW YOUR FRIENDS
Congrats on a great install and an awesome audio upgrade. Get on the trails, show your friends
and show us too. We're all over social, just like you. @HifonicsUSA #PowerFromTheGods
#RZRLife
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Advertisement
