Advertisement
HIFONICS AM/FM, Bluetooth Source Unit for RZR
Thanks for choosing HIFONICS. This is a special mounting system for our AM/FM Bluetooth
Source unit.
Follow the instructions inside the source unit for connecting the source unit to power, external
amplifiers and speakers. See all the components, upgrades and Stages available for RZR on
the website HIFONICS.com
We have made the install process so simple that you will be in and out of the machine in about
an hour.
IN THE BOX
AM/FM, Bluetooth Source Unit
RZR-DASHR – DIN mounting adapter for gauge mount radio
Plastic insert for switch if unused
SAFETY
Always make your machine safe before installing any accessories
Turn the ignition off and remove the key
Remove the negative terminal of the battery
Safety Glasses - always wear eye protection
TOOLS REQUIRED
T-40 Torx Bit Driver
STEP 1 – REMOVE THE HOOD
Remove the hood by turning the thumb screws and setting the hood aside.
STEP 2 – REMOVE THE DASH
Remove the dash by removing the (2) T-40 Torx screws. Pull the dash forward towards the
cabin. You will need to remove the gauge, headlight and 4WD switch connectors.
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Advertisement
