Advertisement
STEP 3 – TORX
Looking down toward the firewall you will see (1) T-40 Torx that holds the dash pocket into
place. You will remove that Torx and then remove the dash pocket through the front of the dash.
There is a small metal clip on the dash pocket, you will need to move this clip to your new
RZR-DASHR adapter.
For additional technical information on this and all HIFONICS products, go to the "SUPPORT" tab at HIFONICS.com
There you will find helpful, FAQ, TEQ Tips and you can contact Technical Support via email.
©2018 Maxxsonics USA
Advertisement
