DeWalt DCST922 Instruction Manual page 11

Fig. F
13
12
Proper Hand Position (Fig. G)

WARNING:
personal injury, ALWAYS use proper hand position
as shown.

WARNING:
personal injury, ALWAYS hold securely in anticipation of
a sudden reaction.

WARNING:
protection that conforms to ANSI Z87.1 (CAN/CSA
Z94.3) while operating this appliance.

WARNING:
making any assembly, adjustments, or changing
accessories. Such preventive safety measures reduce
the risk of starting the TRIMMER accidentally.

CAUTION:
use the appropriate type of cutting line.

CAUTION:
remove any wire, cord, or string-like objects which
could become entangled in the rotating line or spool.
Be particularly careful to avoid any wire which might
be bent outwardly into the path of the appliance, such
as barbs at the base of a chain link fence.
Proper hand position requires one hand on the primary
handle 14 and one hand on the auxiliary handle
To reduce the risk of serious
To reduce the risk of serious
Always use proper eye
Remove the battery before
Before you begin trimming, only
Inspect area to be trimmed and
4 .
Fig. G
14
4
Switching Trimmer On and Off (Fig. A)
To turn the appliance on, squeeze the lock-off button
then the variable speed trigger
To turn the appliance off, release the variable speed trigger
and the lock-off button.

WARNING:
trigger in the on position.
Speed Control Switch (Fig. A)
This string trimmer gives you the choice to operate at a
more efficient speed to extend the runtime for larger jobs, or
accelerate the trimmer speed for high-performance cutting.
To extend runtime, push the speed control switch
forward toward the auxillary handle
position. This mode is best for larger projects that require
more time to complete.
To accelerate the trimmer, pull the speed control switch
back toward the battery housing
This mode is best to cut through heavier growth and for
applications that need higher RPM.
nOTE: When in "HI" mode, runtime will be decreased as
compared to when trimmer is in "LO" mode.
Trimming (Fig. H, I)
With the trimmer on, angle it and swing side to side as
shown in Fig. H.
Maintain a minimum distance of 24" (610 mm) between the
guard and your feet as shown in Fig. I.

WARNING:
roughly parallel with the ground (tilted no more than
30 degrees). This trimmer is not an edger. DO NOT
TILT the trimmer so that the string is spinning near
a right angle to the ground. Flying debris can cause
serious injury.
English
2 and
1 .
Never attempt to lock the
3
4 into the "LO"
11 into the "HI" position.
Keep the rotating string
9