Download Print this page
Honeywell DC300 Series Instruction Manual

Honeywell DC300 Series Instruction Manual

Advertisement

Quick Links

DC300 and DC301 Series
Instruction Manual
Honeywell International Inc.
10 Thurber Boulevard
Smithfield, RI 02917
USA
800-873-5242 (US & Canada)
001 800 446 1495 (México)
54 911 3578 8295 (Argentina)
54 911 3578 8295 y 55 11 3309 1021 (Latinoamérica)
11 3309 1000 (Brasil)
50165841-001 Rev A

Advertisement

loading

Summary of Contents for Honeywell DC300 Series

  • Page 1 DC300 and DC301 Series Instruction Manual Honeywell International Inc. 10 Thurber Boulevard Smithfield, RI 02917 800-873-5242 (US & Canada) 001 800 446 1495 (México) 54 911 3578 8295 (Argentina) 54 911 3578 8295 y 55 11 3309 1021 (Latinoamérica) 11 3309 1000 (Brasil)
  • Page 2 INTRODUCTION The DC300 Series are single use filtering facepieces with a National Institute for Occupational Safety and Health (NIOSH) classification of N95. DC300N95 Filtering Facepiece Respirator without nose clip DC300N95V Filtering Facepiece Respirator without nose clip, includes exhalation valve DC301N95 Filtering Facepiece Respirator with nose clip This Instruction Manual refers only to the use of these filtering facepieces.
  • Page 3 g) In atmospheres where the concentration of the contaminant exceeds: i. 10 times the contaminant’s permissible exposure limit (PEL). PEL is defined as the maximum permissible 8-hour time weighted average (TWA) concentration established by applicable OSHA or other government regulations, or by NIOSH, ACGIH or CSA. ii.
  • Page 4 2. If the respirator is not fitted with an exhalation valve exhale sharply. A positive pressure should be felt inside the respirator. 3. If the respirator is fitted with an exhalation valve, inhale sharply. A negative pressure should be felt inside the respirator. 4.

This manual is also suitable for:

Dc301 seriesDc300n95Dc300n95vDc301n95