Citizen B11 Series Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Hour hand
Second hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Setting the time and calendar
Setting the minute and second
1.
Pull the crown out to position
The second hand points 0 second.
2.
Rotate the crown to adjust the minute.
• When you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
• The hour hand moves synchronously.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
3.
Push the crown in to position
time source to finish the procedure.
Setting the hour and date
1.
Push the crown in to position
2.
Press and release the upper right button
The second hand moves forward-backward-forward.
3.
Rotate the crown to adjust the hour and date.
• When you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
• The date indication moves synchronously.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
4.
Leave the watch for about 30 seconds without any operation to
finish adjustment.
B11* Abbreviated instruction
Minute hand
Button
A
Date indication
Crown
Crown's position
0 1 2
.
2
in accordance with a reliable
0
.
0
.
A
B11* instruction manual
Setting the month and year
1.
Pull the crown out to position
The second hand shows the current setting of the month and year.
• Year and month are indicated as follows:
"Month" corresponds to one of
the 12 zones shown in the figure
below.
Each number means month.
12
11
1
10
9
8
7
5
6
2.
Rotate the crown to adjust the month and year.
• When you rotate the crown quickly a few times, the hand will move
continuously. To stop the rapid movement, rotate the crown in either
direction.
3.
Push the crown in to position
Adjusting the hour easily
You can adjust hour hand easily for overseas trips or other occasions.
1.
Push the crown in to position
2.
Press and release the upper right button
The second hand moves forward-backward-forward.
3.
Rotate the crown to set the hour.
4.
Leave the watch for about 30 seconds without any operation to
finish adjustment.
1/2
.
1
"Year" corresponds to the years
since leap year and is indicated
with markers in the zone of each
month.
Years since leap year: 0 (Leap
year)
Years since leap year: 1
Years since leap year: 2
2
Years since leap year: 3
3
4
to finish the procedure.
0
.
0
.
A
0
1
2
3