Summary of Contents for Skil PWRCORE 20 CS4556E-00
Page 1
Model: CS4556E-00 Brushless Chainsaw WARNING: To reduce the risk of injury, the user must read and understand the Owner’s Manual before using this product. Save these instructions for future reference. 1300-017-545 www.skil.com.au For Customer Service...
Page 2
Front handle Safety switch Activation lever for kickback brake Rear (hand guard) handle Oil reservoir Trigger switch Chain guard Drive Oil outlet sprocket Metal gripping teeth Ventilation slots Minimum mark Symbol for rotation and cutting direction Guide fins for chain bar Fastening bolt Chain tensioning knob Chain tensioning...
INTRODUCTION f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) • The power tool is intended for sawing wood such as protected supply. Use of an RCD reduces the risk of wooden beams, planks, branches, tree trunks, etc., and electric shock.
e) Maintain power tools and accessories. Check for CHAIN SAW SAFETY WARNINGS misalignment or binding of moving parts, breakage • Keep all parts of the body away from the saw chain of parts and any other condition that may affect the when the chain saw is operating.
- SKIL battery: BY5197E-03 BY5196E-03 • Tensioning chain q - SKIL charger: SC5358E-01 QC5360E-01 QC5359E-00 ! remove battery from tool • Do not use the battery when damaged; it should be - place the chain saw on any suitable flat surface...
Page 13
4. tighten locking knob by turning it clockwise - use the gripping teeth as a leverage point (✱) while 5. release chain bar cutting t a 6. the correct chain tension is reached - reset the gripping teeth at a lower point when sawing when the chain can be raised approx.
! do not let the chain contact the ground • Limbing a tree i Limbing is removing the branches from a fallen tree - after completing the cut, wait for the saw chain to stop - when limbing leave larger lower limbs to support the log before you move the chain saw off the ground - always stop the motor before moving from tree to tree...
Page 15
Tool operates intermittently - internal wiring defective -> contact dealer/service station - on/off switch defective -> contact dealer/service station Dry chain - no oil in reservoir -> refill oil - vent in oil reservoir cap clogged -> clean cap - oil passage clogged ->...
SKIL products that are not purchased from an authorised SKIL retailer. To make a claim, return the faulty item together with proof of purchase directly to your closest service agent or to the place of purchase.
Need help?
Do you have a question about the PWRCORE 20 CS4556E-00 and is the answer not in the manual?
Questions and answers