Related Manuals for cef Idea Island CEF-ID34-8
Summary of Contents for cef Idea Island CEF-ID34-8
- Page 1 Idea Island Assembly Instructions KIDS Our Customers. Our Inspiration. We should all try to be more like them...
- Page 2 Components What’s in the Box! • LEGS (4) • HEAVY DUTY 5” CASTERS (4) • ELECTRIC COVER (1) • CONNECTOR ANGLE (2) • LEG COVER (4) • RATCHET FASTENER: NYLON BLACK (28) • Serrated NUT ¼ 20” (8) • FLAT WASHERS (28) •...
- Page 3 Heavy Duty 5” Casters Electric Cover Connector Angle Legs Leg Cover Flat Washers Hex Cap Bolt ¼ 20 x ¾ Ratchet Fastener: Nylon Black Serrated Nut ¼ 20 Tools What you will need!
- Page 4 • Standard Allen Wrench 5/32 • Standard ¾” Wrench...
- Page 5 Lets Get Started! REMOVE SOLID MAPLE BUTCHER BLOCK FROM BOX AND PLACE IT DOWN ON A SMOOTH SURFACE. INSERTS SHOULD BE EXPOSED AS SHOWN PLACE ONE LEG AT A TIME AND ALIGN THE HOLES WITH THE INSERTS IN EACH CORNER AS SHOWN PAIR ONE HEX CAP BOLT AND ONE FLAT WASHER AND INSERT INTO EACH HOLE ON THE...
- Page 6 AFTER INSERTING THE BOLTS IN EACH DESIGNATED HOLE, THE LEGS SHOULD BE ALIGNED AS SHOWN IN THE IMAGE TO THE LEFT *YOU ARE NOW READY TO TIGHTEN THE BOLTS SECURELY USING THE RECOMMENDED 5/32 ALLEN WRENCH ALIGN THE CONNECTOR ANGLE TO THE HOLES IN THE LEGS AS SHOWN TO LEFT AND INSERT HEX CAP BOLTS WITH WASHERS AND TIGHTEN...
- Page 7 USING THE LEG COVER AND RATCHET FASTNERS, PLACE THE LEG COVER OVER LEG AND ALIGN WITH PRE-DRILLED HOLES. PLACE ONE RATCHET FASTNER PER HOLE AND SIMPLY SNAP IN PLACE *REPEAT THIS STEP ACCORDINGLY TAKE ONE OF THE HEAVY DUTY 5” CASTERS AND INSERT IT ON THE TOP OF YOUR LEG INTO DESIGNATED HOLE.
- Page 8 THE ELECTRICAL UNIT WILL ALREADY BE CONNECTED TO YOUR BUTCHER BLOCK TABLE AS SHOWN UNWRAP THE CORD AND EXTEND THE CORD LONG WAYS DOWN THE CHANNEL PLACE THE ELECTRICAL COVER OVER THE CHANNEL LINE HOLES UP WITH THE COORDINATING HOLES ON THE LEGS AS SHOWN PLACE THE RATCHET FASTENERS IN THE HOLES AND SNAP THEM IN PLACE...
- Page 9 YOUR TABLE IS NOW COMPLETE! ABOVE IS A PICTURE OF THE IDEA ISLAND FULLY ASSEMBLED MAKE SURE YOUR CASTERS ARE LOCKED AND SECURED BEFORE FLIPPING THE TABLE OVER. THIS WILL PREVENT ANY ADDITIONAL MOVEMENT USE CAUTION AND WITH ASSISTANCE FLIP TABLE BACK OVER AND YOU ARE READY TO USE YOUR NEW PRODUCT!