Data Management - B. Braun Omnitest 5 Manual

Omnitest® 5

data Management

Can i transfer the data from my Omnitest®
device?
Which electronic diaries are compatible with
Omnitest® 5?
What cable do i need for the data transfer from
Omnitest® 5 to an electronic diary?
Will the data be deleted from my Omnitest® 5
after transferring?
What do i need to transfer the data to an
electronic diary?
How are the stored measurement results
transferred to an electronic diary?
8
yes. the measurement results can be transferred via computer to an
electronic diary.
For data analysis, you can transfer your data to the free-of-charge
online portal Omnitest® Center (www.omnitestcenter.com).
you can also use other data management solutions from external
providers such as diABAss® (mediaspects GmbH). An overview can be
found at: www.bbraun.com/diabetes-datamanagement
For the data transfer, you only need a PC connection cable (standard
usB). the cable can also be purchased from B. Braun as an accessory.
no, the last 500 results are stored on the Omnitest® 5.
the data transfer is carried out using a PC connection cable (standard
usB) and an internet browser. For it to work correctly, you need to in-
stall a driver and allow Java applets in your browser. Further information
and relevant driver, see: www.bbraun.com/diabetes-datamanagement
the data transfer is carried out in three easy steps:
1. Connect the PC connection cable (standard usB) to your computer.
2. then connect your Omnitest® 5 to your computer with the PC
connection cable (standard usB).
3. now start the data transfer according to the instructions of the
software/online diary.