Settings; Stored Readings - B. Braun Omnitest 5 Manual

Blood glucose measurement
Hide thumbs Also See for Omnitest 5:
Table of Contents

Advertisement

Omnitest® 5
settings and stored readings
What markers can i select for my
measurement results?
What is the
"timer"?
What is the difference between timer and alarm?
Are alarm times permanently deleted,
if i deactivate the corresponding alarms?
When do i use
"general marking"?
What benefits offers the storage of my target
level in Omnitest® 5?
How many measurement results can be stored in
Omnitest® 5?
6
Following markers are available:
test with control solution
test before meal (preprandial)
test after meal (postprandial)
General markings (special circumstances)
the timer can help to remember a follow-up test
after mealtimes.
Note:
With the activation of the timer, the current
Time
measurement result is automatically saved as
mmol/L
"preprandial".
the timer can only be activated immediately after measurement and
reminds you of the follow-up measurement after a defined period of
time. An activated alarm, however, works like an alarm clock and goes
off every day at the set time.
no. the alarm times are retained and can be reactivated at any time.
With this marker, you may indicate unusual circumstances or an
extraordinary result. Further information should then be recorded in
your diabetes diary.
On the basis of the stored target value, the device automatically
calculates any deviation right after the measurement is taken.
this is then shown as a positive or negative value on the screen.
it lets you assess your blood glucose level more easily and, when
appropriate, initiate corrective action. By pressing the buttons
or
after the display of the measurement result, the target level and
deviation from the target level are shown according to your settings.
Omnitest® 5 stores 500 readings. the newest reading is always
displayed first when you switch on the device via
allows you to search for an older reading. Once the memory capacity
has been reached, the oldest readings are replaced by the newest.
defined target level
deviation of the current
measured level from the
target level
. the button

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnican lance

Table of Contents