Advertisement
Attaching the Tray
Choose the appropriate hardware based on the mounting style of your
housing. Both 12-24 and 1/4-20 hardware are included with the tray.
Most Ikelite housings are marked with the thread size on the inside
bottom of the housing. If your Ikelite housing is not marked, it is most
likely 12-24 thread. Use the provided shoulder washers between the
screws and the tray.
Most non-Ikelite housings have a single 1/4-20 thread. Attach the
adhesive-backed rubber pad to the top of the tray before attaching
a housing with central tripod-style mount. The rubber pad prevents
rotation of the housing once it is tightened on the tray. Use the
provided flat washer in between the screw and the tray.
MADE IN USA
MADE IN USA
2
Advertisement
