Table of Contents
Advertisement
Available languages
Available languages
5.
Press the cover gently back into place until you hear a click.
Removing the Battery and SIM/SD Card
1.
Make sure that your mobile phone is off.
2.
Remove the back cover.
3.
Lift the battery up and out.
4.
Slide the SIM card out.
5.
Slide the SD card out.
Charging the Battery
When you first get your new phone you'll need to charge the battery.
1.
Connect the adapter to the charger jack. Ensure that the adapter is inserted with the
correct orientation. Do not force the connector into the charger jack.
2.
Connect the charger to a standard AC wall outlet.
3.
Disconnect the charger when the battery is fully charged.
Switching Your Phone On/Off
Make sure the SIM card is in your device and the battery is charged.
Hold Power Key to switch on your phone.
To switch it off, hold Power Key to get the phone options. Select Power off, and
then tap OK.
Setting Up Your Phone for the First Time
When you first power on your phone after you purchase it or reset it to factory settings
(see chapter Sorting out Your Phone Settings – Privacy: Reset to Factory Settings), you
need to do some settings before using it.
Tap Menu Key in the standby mode, then select System settings > Language &
input > Language to change the language you want to use, if needed.
Switching to Sleep Mode
To save battery power, Sleep Mode suspends your device to a low-power-consumption
state while the display is off. Your device also goes into Sleep Mode by itself when the
display is automatically turned off after a certain period of time. You can start sleep
mode by the following method.
Press Power Key to switch to Sleep Mode.
Waking Up Your Phone
1.
Press Power Key to activate your screen display.
2.
Tap the
NOTE: If you have set an unlock pattern, PIN or password for your phone (see chapter
Sorting out Your Phone Settings – Security Settings) you'll need to draw the pattern or
icon, drag to the right.
13
Advertisement
Chapters
Table of Contents
